A swimming pool can add a lot of fun and relaxation to your life, but they can also be a lot of work if you don’t stay on top of the maintenance that is involved in owning one. It is very important to take proper care of your pool in order to get the most use and enjoyment out of it. It is extremely important to test the water regularly. It is important to circulate the pool water for 24 to 48 hours before you test it. This will give you a more accurate reading. It is also important to use a clean container when collecting the water that is to be tested. One can receive a lot of great pool tips by visiting www.PoolGab.com.
When you scoop the water out of the pool that is to be tested, it is important that you go at least elbow deep to get the most accurate reading. The optimum water levels are as follows, Bromine 1.0- 3.0 ppm, Chlorine 1.0-3.0 ppm and pH 7.2-7.6. The water’s pH is a measure of acid and alkalis in the water. Water that is too alkaline or acidic will cause chemical reactions that are undesirable. It is important to keep these numbers as closely to the recommended numbers as possible. There are solutions if the levels are not within the healthy range.
After testing your water successfully, it is recommended that it be tested once per month from this point on. This will help you to maintain the optimum levels while your pool is in use. It will prevent the water from becoming cloudy or too harsh and it will keep it comfortable for you and your guests. It is very easy to perform the testing on your own. It is something that pool owners prefer to accomplish on their own.
It is a good idea to educate yourself as much as possible because performing the testing and finding a solution on your own is much cheaper than hiring someone to do so for you. It is also easy to test for yourself and it only takes a few minutes of your time.